|
The
FR-1 Receiver
"Ferris"
|
The
Ferris analog receiver is great for septic tank
locating with cast iron or non-metallic lines and
tanks, using the FT-8
flushable transmitter.
But that's not all. Any 512Hz transmitter
from Prototek or other manufacturers will work with
this receiver, letting you follow cameras, jetters
and power snakes wherever they may lead you.
And it's easy to afford - just
$**
(with
soft case) |
 Call
us about our Ferris kits |
**
Please call for prices |
|
- The
antenna rod picks up the signal from the transmitter.
It also points you in the direction of the line.
- The
meter indicates the strength of the peak signal (to
the right) as well as the null signal (to the left).
- The
sensitivity knob allows you to precisely control the
receiver's response to the signal and acts as a volume
control and on-off switch.
- The
battery test button (red button on handle) takes the
guesswork out of battery strength.
- The
near/far switch is used in the "far" position
when starting the locate, then switched to "near"
when the signal gets stronger.
- In
addition to watching the signal on the meter, you
can hear it through the speaker or optional headphones.
- Runs
on 6 AA Alkaline batteries.
Operating
instructions
|
